Monday, October 10, 2011

American Made!

Quite often I am asked where "Cable-Tite" is made. The answer: Gallatin, Tennessee. You may wonder why a foundry in Gallatin TN manufactures a hurricane tie-down system that's used in high wind regions outside of Gallatin TN.

We are first of all, a foundry, started in the 1950's making steel parts for a number of industries, including military, automotive, aircraft, and nuclear plants. A new home builder came to us to solve the problem of hurricane tie-down systems that were either difficult to install or lacked hold-down capabilities.

As a result, our engineers patented this cable tie-down system for uplift protection to meet a demand for better protection than current systems that use stamped aluminum hurricane clips or threaded rods. At Cable-Tite we love to say that we exceed codes, that we are better than we have to be, and "that it's not tight, until it's Cable Tite"

The three steel parts, the anchor nut, the anchor cap, and the top plate are made from poured steel in our foundry, the same basic steel materials used for tanks and machine guns. Steel, poured at 2800 degrees, not stamped out aluminum clips. The cable vises are made for us in Chicago.

So, when we say "Made in America" it is!!! Buy America!!!!

Thursday, June 30, 2011

http://www.popularmechanics.com/home/improvement/interior/8-ways-to-protect-your-home-against-tornadoes-and-hurricanes-cable-tite-pin-down-your-home#fbIndex6

Thank you, Popular Mechanics, for including us as one of the 8 ways to secure your home from high wind uplift in hurricane winds. This is a great article.

Tuesday, June 28, 2011

Retro-fit???

I receive many phone calls about using Cable-Tite to"retro-fit" for wind storm protection. It seems that homeowners are keenly aware that their homes were not adequately constructed 10, 15, 20, 30 yrs ago. They currently have no high wind uplift protection from hurricanes or other straight-line winds. So, they call me....

First of all, I am thrilled that they have watched the Cable-Tite video, read the Cable-Tite information, and want the best, most robust tie-down system available. The question is about the possibility of retro-fitting their current home. Cable-Tite is designed for new home construction. However, if the home owner is willing to make the effort, then, yes, Cable-Tite can be used for retro-fit.

But, it's a lot of work. You need to have access to the foundation with the anchor bolts and to the top plate, and the area between the studs needs to be open. Cable-Tite is only installed in the outside walls, so there's no need to open the interior walls. Retro-fitting with Cable-Tite is easiest during a remodeling project. Usually the walls are open which gives you easy access to the foundation and top plate and allows you to tighten the cable tightly and properly.

Sometimes the home owners are frustrated with the amount of effort and cost there is to retro-fit for high wind protection. Of the 8 high wind protection systems on the market, all require you to open the walls for proper installation. When you think about what you are trying to do...that is, secure the top plate to the foundation, you realize that you have to have access to both them.

I applaud those home owners who see the need and spend the time and effort to install a secure high-wind protection system, and who realize Cable-Tite is the best and the easiest to install. Remember that your home is only as secure as the system you install.

For any reading this that are contemplating new home construction.....please.....insist on installing Cable-Tite soon after the roof is installed, and while the walls are still open.

If you are considering a retro-fit, call me for advice and tips.

Friday, April 29, 2011

Tornado in Cleveland TN.

















Wednesday afternoon a tornado touched down in Cleveland TN, near my daughter's house. She sent me a photo of damages to a house nearby. I am posting it because this is a classical mistake in building codes, and a mistake that Cable-tite can correct. Look at the close-up on the left of the foundation. Notice that the top block is still attached to the house. This is because the anchor bolts were set in the top row. They held......but what didn't hold was the mortar joint.


The sad part is that this house is built "to codes". At Cable-tite, we have pushed to build "beyond codes". If the builder had installed the anchor bolts into the footers (or slab) and attached Cable-tite to them with extended cable attached to the top plate, this problem would have been avoided. The cost during construction for Cable-tite could have been approximately $1000, and the house would have been secure.


Cable-tite is not considered tornado protection. A heavier wind would have destroyed the house with or without Cable-tite. But in this particular case, it would have saved the house.


For builders reading this.....please.....sink the anchor bolts into the footers, EVEN if you chose not to use our products. There is virtually no cost for doing that. Call me and I'll help guide you in building a more secure home.


Homeowners.....ask for Cable-tite by name. Cable-tite is the leader in hurricane protection and straight line winds that create uplift. This most recent flurry of tornadoes had straight-line winds, some over 100 MPH in Alabama, Mississippi, Georgia, and Tennessee.


Cable-tite is concerned about your safety.


Monday, February 21, 2011

Housing starts up in January 2011


"Housing starts up 14% in January to 596,000 units. The U.S. home building industry beat market forecasts in January, as starts rose 14.6 percent to a seasonally adjusted annual rate of 596,000 units — the highest level since September 2010, according to the U.S. Commerce Department."
More good news for the new home construction industry....housing starts up again. We continue to see a recovery, which everyone loves to hear. We are not back to 2007 housing start rates, but at least better than 2009 and 2010.
At Cable-tite, we are proud to be part of the hurricane and high-wind uplift protection used in new homes in the wind zone regions. Thanks for using our cable tie-down system in your engineered designs. Remember...."it's not tight, until it's Cable-tite"
Architects, Engineers, Contractors, and Home Owners: Please call us for advise or help with your wind protection questions.


Tuesday, January 11, 2011

Multi-generational Housing

In early 2007, housing took a downturn, and still today isn't near the 2006 levels for new home construction. However, the demand for housing did not decrease. That is, new households continue to be established at the same rate. The problem felt nationwide was that the new household didn't have the funds to purchase either an existing home, or a new home. The trend for two households to share the same dwelling is increasing.

But, this is nothing new. In 1900, 57% of homes had two or more households of multi-generational families living together. Quite often there were persons over 65 living with their extended family. With the post-war boom through the end of the century, the percentage decreased to approximately 16%. However, since 2000, there has been a 30% growth in multi-generational family dwellings.

What does all this mean? It means that architects and new home builders are reconsidering the master plan to include space for either returning children called "boomerang" kids or older parents. This often includes two master bedrooms, one level housing, finished space in either the attic or the basement, or even a "suite". Some small families are including a separate living space for rental income. Builders are referring to the added or finished space as "Residence Two".

At Cable-Tite we realize that whatever the housing trends are, there is still a need for high-wind uplift protection. Maybe even more so with more lives to protect. Don't overlook the need for a continuous tie-down from the anchor bolts to the top plate. The Cable-Tite system is the only hurricane tie-down system to offer "continuous" tie-downs, and it exceeds new home construction code requirements.