A few days ago I re-visited Fred Yates home on Lake Park Drive. You might remember that we installed over 60 Cable-Tite in his new home in April. For whatever reason, he was just now closing the walls, which worked to our advantage. The Cable-Tite product had been installed approx 4 1/2 months. And every cable was still "cable-tight".
There's a lot of talk in the industry about accumulated compression. Cable-Tite does not have an issue with this problem. First of all, the cables were installed in his house about a month after framing, which we suggest for best results. But even so, accumulated compression will continue for 3-6 months after framing. There was no noticeable change in the pretensioned cables.
It confirmed our claim that there is no need for adjustment after installation. As you know, metal hurricane clips bend, bow, or loosen during accumulated compression. This issue is exaggerated by installing the clips the next day after framing, when there is no accumulated compression. Typical compression is between 1/4 and 3/8 per story. In a two-story house the metal clips at the sil plate could be bent as much as 1/2 inch. If so, the clips have lost much of their hold-down value. Threaded rods can be a better alternative, but they require an adjustment in the attic 4-6 months later, and maybe again a year later.
After my visit to Fred Yate's house I'm even more "sold" that Cable-Tite is the best high-wind and hurricane tie-down system available for uplift protection. And did I mention.....easy to install.
