More Cable-tite 101 Tips

This is a Cable-tite tip for installing Cable-tite on a porch or deck or in any area that doesn't have a traditional top plate.

In this house being built by Ronald Deutch shown at the left, there were 2 - 2x12's used to support the roof rafters. They are sitting on top of a site-built column. We drilled a 1/2" hole in the crack between the two 2x12's for the cable to install between the anchor bolts and the top plate. The problem in this case was the inability to drill a one inch hole for the cable vise to sit. The roof was already constructed and there wasn't room for a drill.

We found two scraps of 2x4 and nailed them together. Then, drilled a one inch hole in them. They fit perfectly on top of the 2x12's and allowed the vise and steel top plate to sit properly. Once the cable was locked it was installed correctly.

This is yet another reason Cable-tite is the preferred cable tie-down system for builders who need uplift protection from straight-line and hurricane winds in high wind zone areas. The system is flexible on site, and didn't add more than 5 minutes to the installation.

Texas Hill Country

80 Cable-tite in Texas Ranch Home

Cable-tite just completed installation of 80 high-wind tie-downs in the Texas Hill Country new home of Ronald Deutch. Mr. Deutch chose Cable-tite for his uplift protection after studying several systems on the internet. This 3500+ sq ft. ranch style house sits on a hilltop and he felt he needed more than hurricane clips or threaded rods. He was glad to have a flexible cable system that adjusted easily to the framing of the house. Mr. Deutch's house far exceeds construction codes. It's encouraging to work with a person that understands the need for a safe and secure home by constructing a home much better than it "has" to be. My motto "Build Beyond Codes" and that's when Cable-tite excells.

I worked with Carlos Tellez and Jose of Tellez Remodeling and showed them how Cable-tite is installed. After approximately 30 mins, they were able to install them on their own. When we say this is easy and quick to install, we mean it. We averaged installing one every 11 mins. This included adding or replacing some anchor bolts.

Thanks to everyone involved in this installation....it went GREAT, and we all enjoyed working together. Yippee Ki-Yea