WKRN Channel 2 News story

http://www.wkrn.com/global/story.asp?s=12223631#

(video on website)

GALLATIN, Tenn. - A Gallatin company has designed a system that may keep homes in one piece during high winds.
Cable-Tite installs high tension cables within the walls of new construction homes. The cables are anchored in the foundation and tied to the roof.
"What we're trying to do is hold the roof to the foundation," Cable-Tite's Dale Richardson explained. "We want to keep the square of the top plate and the bottom plate and the walls as a cube and hold it together."
The science behind Cable-Tite is that if the home is kept squared, with the roof intact, the construction can withstand higher sustained winds and wind gusts.
Richardson said, "When you have high winds, it's trying to push the roof off the top of the house and when the roof goes up, then the walls fall over."
Cable-Tite has only been in business for two years and has done most of its work so far along the Gulf Coast and in Houston, Texas.
As for costs, according to Richardson, in "most houses, it's going to be maybe 1% of the total cost, if you're talking a $200,000 home, maybe $1,200 to $1,500."
Gallatin builder Fred Yates told News 2 he wouldn't think of building another house without Cable-Tite.
He's currently including the system in a massive upper-scale home on Old Hickory Lake.
"Anytime [the wind] starts whipping up, you can see it can get under that roof and lift it up," he said. "If you don't have something holding it down, it can tear it right off."
Yates said he can see the system gaining popularity quickly among other builders who build upscale homes, and once others see the benefit, the cable system will be in demand in mid-priced houses.
"This system will probably not withstand a Category 5 [Hurricane], but nothing will, but the peripheral winds, the ones that are 60, 70, 90 miles per hour, you don't have a problem," he said. "It'll hold it down.
Richardson said the system has been lab tested to withstand winds of up to 90 miles per hour, but so far, none of the homes where the system has been installed have been tested by Mother Nature's highest winds.

Got the Blues????

Today's blog is a little different, but informative. As you know, Gallatin, TN is the home of Cable-Tite. But did you know Clarksdale, Mississippi is the home of the Blues. Check it out! http://www.shackupinn.com/

And if you love the blues, you will love Shack Up Inn in Clarksdale. Each room is a refurbished cabin, rugged on the outside as in by gone days, but clean, comfortable, and cozy inside. It's a great weekend getaway to listen to some authentic blues music played all over town. And spend the night in a cabin.

Now, we can add "safe" to the description. Recently they added Cable-Tite to the newly constructed cabins. You will notice in the photo that the cabins are sitting on piers. The owners were concerned about uplift protection from high winds and hurricanes. They contacted us and we worked out a plan for Cable-Tite usage to tie-down the cabins. Anchor bolts were installed into concrete beside the piers, and cable extended to the top plate. The flexibility of Cable-Tite makes it the only hurricane tie-down system that would meet construction codes for uplift protection.

Visit Clarksdale and the Shack Up Inn. Stick your head under the cabins and see the Cable-Tite system. Hopefully, you won't need it, but just in case, you know it's there. At the Shack Up Inn or at your house.......Cable-Tite offers peace of mind. (sorry, we don't offer "Blues")

IAPMO Evaluation Report - News Release

IAPMO ISSUES FAVORABLE CABLE-TITE REPORT

Gallatin, TN – On March 1, 2010 the IAPMO Certification Board issued an Evaluation Report which certifies that Cable-Tite meets the International Building Code for residential wood-frame construction in high-wind regions. IAPMO reviewed the certified Smith-Emery Laboratories test results with their engineering staff and determined that Cable-Tite’s claim as a hurricane hold-down system was true. The report, number 0170, is available to read online at www.cabletite.com.

New home builders continue to search for the most robust system for protection from uplift caused by high winds. There is a good, better, and best approach for what they choose. The metal hurricane clips are a good system that allows for minimum protection. The threaded rods offer better protection but are difficult to install. The best system is the “Cable-Tite” system that uses cables to create a continuous path from the roof to the foundation.

“Other current methods are time consuming and expensive. Cable-Tite is an easy system to install, in about half the time, and offers better protection”, says Dale Richardson, Business Development Director at Cable-Tite. “The high-strength steel cable is attached to the top plate and held securely in place with our patented cam locking cap and nut screwed to the concrete embedded anchor bolt.”

With the recent certification, engineers, builders, codes inspectors, and ultimately, home owners can request and use Cable-Tite Tie-Down Systems with confidence.

YEAH!!!!!!!!!!!!!!!

YEAH!!!!!!!!!!! Today our "official" Evaluation Report came, Report #0170, and is posted on our website. It is amazing that it has taken our own in-house testing during 2008, Smith-Emery Laboratory testing in April 2009, and further review and scrutiny until today.....March 1, 2010 to receive an "official" response from IAPMO, an Evaluation Service. Nevertheless, the claim that we made in the beginning has now verified. Cable-tite has been dissected many ways to get the same conclusion.....Cable-Tite is the best, most robust system for anchor tie downs of your new home to offer high wind protection typical of a hurricane over 150 MPH. It meets and exceeds all construction codes for hurricane tie-down systems in the high wind regions for uplift protection.

Designed, tested, proven, and today.....stamped OFFICIAL!

More Cable-tite 101 Tips

This is a Cable-tite tip for installing Cable-tite on a porch or deck or in any area that doesn't have a traditional top plate.

In this house being built by Ronald Deutch shown at the left, there were 2 - 2x12's used to support the roof rafters. They are sitting on top of a site-built column. We drilled a 1/2" hole in the crack between the two 2x12's for the cable to install between the anchor bolts and the top plate. The problem in this case was the inability to drill a one inch hole for the cable vise to sit. The roof was already constructed and there wasn't room for a drill.

We found two scraps of 2x4 and nailed them together. Then, drilled a one inch hole in them. They fit perfectly on top of the 2x12's and allowed the vise and steel top plate to sit properly. Once the cable was locked it was installed correctly.

This is yet another reason Cable-tite is the preferred cable tie-down system for builders who need uplift protection from straight-line and hurricane winds in high wind zone areas. The system is flexible on site, and didn't add more than 5 minutes to the installation.

Texas Hill Country

80 Cable-tite in Texas Ranch Home

Cable-tite just completed installation of 80 high-wind tie-downs in the Texas Hill Country new home of Ronald Deutch. Mr. Deutch chose Cable-tite for his uplift protection after studying several systems on the internet. This 3500+ sq ft. ranch style house sits on a hilltop and he felt he needed more than hurricane clips or threaded rods. He was glad to have a flexible cable system that adjusted easily to the framing of the house. Mr. Deutch's house far exceeds construction codes. It's encouraging to work with a person that understands the need for a safe and secure home by constructing a home much better than it "has" to be. My motto "Build Beyond Codes" and that's when Cable-tite excells.

I worked with Carlos Tellez and Jose of Tellez Remodeling and showed them how Cable-tite is installed. After approximately 30 mins, they were able to install them on their own. When we say this is easy and quick to install, we mean it. We averaged installing one every 11 mins. This included adding or replacing some anchor bolts.

Thanks to everyone involved in this installation....it went GREAT, and we all enjoyed working together. Yippee Ki-Yea

INCAST Magazine is the trade publication of the Investment Castings Industry. Cable-tite anchor nut, cap and top plate are made using the investment casting method.

We are thrilled that the January issue has a case study on Cable-tite and how Precision Castings of Tennessee used investment casting to satisfy a need in the housing industry to meet and exceed construction codes.

Please look at our NEWS page for the entire article.

And.....thank you, INCAST!